Guide Buy & Review: Best Vacuum Cleaner For Car

Hey, what’s going on? Guys welcome to Mike’s garage. So today I’m going to do a little review post of this rigid. This is the maximize your vac. There’s a little bit of glare on there maximizing your vac vacuum cleaner kit, which can be considered the best car vacuum for you. It’s like an auto detailing kit pretty cool seven pieces and it’s not like a nice hose in there.

Overview about Ridgid WD1450 14-Gallon 6-Horsepower Wet/Dry Vacuum

So that’s kind of what I wanted to upgrade. So I’ll kind of show you what’s in this? I just got that an at Home Depot and also I just picked up this little other auto detailing kit. It’s like some small little stuff. So you can like get into Vince and you may have seen like my little bumblebee project kind of like little hose adapter thing. I made quite a while ago with some microfiber towels.

I’ll tell you: I like to put a link above paragraph. So you guys can check that out kind of a weird thing I did. But it turned out pretty good and it worked out pretty well to not scratch up any and the interior pieces, but these have like some brushes on them too. So that’s pretty cool so anyways.

Let’s go over to the table and open this stuff up alright here. It is guys so this is the Maximizer vac auto detailing kit. We’re going to just open this up real quick Benchmade grip, Gillian rip. This open alright what have we got in here cool. So I’ve had one of these before and it broke. We’ll see if that happens again it. I mean it’s really nice because of it like has a handle on it.

But like right here this cracked. Because it’s not very flexible or anything like that. We’ll just kind of take the stuff off here. But I don’t really know who makes like a better one. If you know all the better made one. Please let me know but really I just bought this for this. This hose right here so kind of rip this off real quick cool and as you can see well it did have it on there said made in China.

That’s probably why I broke? But this is where it kind of like. It was bending and it’s snapped last time but hopefully, that doesn’t happen maybe that was just a dud one that. I had before here is a nice long extension to get down in between the seats is flexible. That’s pretty cool so you can get like down there in between the seats. It’s also rubberized. It’s got the nice little grip on it what else we got little brush.

This is a nice looking brush. I don’t know use it for a carpet or something like that one more. This one has like a little bit tougher of a grit. This one’s a softer so you could probably like use this on carpet or whatnot you know just to kind of like comb it up and get a junk out of there. That will probably work pretty well this looks like a little coupling adapter to go from two one O’s to another hose.

Pros of Ridgid WD1450 14-Gallon 6-Horsepower Wet/Dry Vacuum

This is the main reason I bought this thing so you can see this octopus of cord of hose right here that box away. This is the main reason so these are really nice. Because it looks like this can go on here and you have like the little connection. So this has an adapter here not quite sure why it needs that. Because this hose already has this little adapter thingy but that doesn’t really work that well.

So I don’t know what that’s for why do I need that? I don’t know. I’m not sure why I need that anyway? So this has the little NP so goes on there nice and easy and this twist. That’s really cool. So you get a little bit of rotation. But what I liked about this is? It’s going to be easier to like get in the car and this has like I don’t know? It’s more bhindi more flexible and it’s like a 10-foot hose.

So it should work out really well and then for this other little kit. This one was kind of cool just I thought it was pretty rad open. This one up suits see what’s all in here. So you have like a bunch a little stuff let me zoom in here a little bit all right. So you got like this is going to taper down to the smaller size. So you can put that on there that can do this. I know sometimes people like the blow out their cars too, which is not a bad not a bad idea either.

But it looks like these you can kind of dislike start building some little contraption boom boom still going check that out looks at that thing. I don’t know why? I needed that long but well I mean I guess. I could see it could be some use for it get all up in there and kind of twist it all sideways and whatnot pretty cool. But it’s not like these nice little brushes. So I should be able to use those on like air vents and whatnot like I said and then it has this like super skinny little guy.

So like you can get in those tight little crevices and vacuum some stuff up. So anyway, guys, I’m gonna go out to the car and use this stuff alright guys. So look how long this freaking the hose is? Now I’m in Shu look at that. That’s pretty freaking long. So I should be able to vacuum like my whole car without even moving the vacuum cleaners. That’s going to be really nice.

So let’s get down to its start vacuuming this thing out cuz as you guys can see look at how dirty that is? You got to love the wintertime gotta love it. I’m gonna clean this thing out and get it all nice and shiny alright guys. So sorry if it’s super loud in here but this is my favorite tool so far. It’s just like the coarse brush. But it works great on like carpet and whatnot you can see. I mean maybe you can see like these little crumbs right.

It gets in there and you’re able. I get them up out of the carpet which normally would take quite a while it just brushes them right up out of the carpet. So I mean: I get weird about doing this? I mean: I pretty much try to get everything out like. I mean: I try to get it like super clean to where you can’t see anything? I really like this one. I use this a little bit and that works really good on the Vince. So I’m liking that setup.

If you want to know more Ridgid WD1450 14-Gallon 6-Horsepower Wet/Dry Vacuum, you can watch the video below to reference:

That’s working pretty cool and overall. I’m bigging it so the vacuum is all the way over there all the way over here cleaning out the car. So it works out really good. So I would totally recommend that that little host kit. It works out awesome also this extended hose is really cool. Because it’s a lot thinner and I’m able to still like maneuver it through my car a lot easier so that works out really well.

But anyways guys hope you like a little review post. We’ll talk to you guys soon later and peace out go ahead grab a knife or like a machete why not right. Let’s just grab something big nice and sharp you know opening up the easy way rather.

Q&A: Who Makes The Best Work Boots For Men?

Hello, Everybody! Today I want to talk about it. Which is modern home study so a box just arrived via the post office with a Wynonna Minnesota return address on it that could only mean one thing you guys know what it is I need a moment here to soak in the craftsmanship and artistry. All right I’ve cut my breath we can continue on. So what you’re looking at here are the-the initial the initial production of my new logging boots and the reason why they don’t have soles on them is?

Who Makes The Best Work Boots?

Because Adam the maker of these fine boots puts them together and then we’ll do a test fit. So I’ll put these on tonight. He’s included a heel block that I can stand on and then we’ll communicate. What I like and what I don’t like? Make any alterations before he stitches them over. That’s a service you’re just not going to get from hardly anyone to be able to have a pre-fit like this is?

Just it makes all the difference in the world these are beautiful. So I had a lot of long conversation with Adam about these boots and exactly what I wanted? I want to discuss to you what makes these so special what makes them different than so many of the other ones starting with the pole loops. You’ll see this is really unique most boots are going to have a pull loop on the back.

I don’t like to pull up on the back and I never use it because it’s too small and I can’t get a gloved hand in it. This is so much better I’ve never had a pair of boots like this. But you can get fingers in there or gloved hands in there to pull them on Adam told me that the stitches inside of this leather a ballistic Cordura nylon that increases that strength that said you’ll never pull these loops out.

That’s a nice touch another thing that makes these boots really special is this inner liner if you look inside here. You see that this tan liner is made of a 100% elk hide and it’s one-piece Adam told me that he knew of four boot makers in the entire country that has the skill the ability to do a one-piece liner. There’s no stitching in the back if you look at your boots most boots are going to have to stitch clear in the back right there and that’s the first thing.

That will wear out on a lot of boots because your heel goes in and out and you’re taking 10,000 steps a day and you’re rubbing and rub on that ultimately it goes through the stitching and where is it out? There’s no exposed stitching on this entire boot. It’s all a one-piece hand fit liner all the way into the toe box and all al-Qaeda. I mean that’s beautiful and that’s absolutely custom and beautiful Adam told me that you can see right there between the cowhide and the and the elk leather.

He uses a neoprene cement that Bond’s those two together so you never have to worry about the two coming apart like those horrible Danner boots that have that gore-tex bootie that after you wear them for a while comes around and you go wiggling around inside the boots.

Some Things You Need to Know About The Best Work Boots

You’ll never have that problem here and that elk. It is so nice on the skin and so nice to have in content. You know being that’s in contact with your foot another thing that I talked a lot about is I wanted a boot that was tough. But athletic I didn’t want a big heavy clunky boot that I couldn’t be nimble in and jump around and really feel athletic. So one thing that he did for me and we do for anyone who wants to do boots is this? What is this heel counter? That’s a big stiff heavy cup that goes around here in cheap boots.

You’ll know you’ll start to a wall or around in them your heel will get all mushy. Because they use a real poor thin leather whites or westco’s or Nick’s will use an 8-ounce material around here and the Adam uses a 12-ounce material and what he did is he cut this down a little bit. So if you can see in there. I press this down right where my thumb goes that’s where that heel that’s where that heavy leather is and he runs mine down a little bit further.

So I get a little bit increased ankle movement. So I get at really a nimble and athletic boot and that’s a great feature. I’m really excited about that I can feel that as soon as I put it on just how good that felt Adam says that he makes takes everything that the best boot makers. How materials that they use it? He increases it by 50% and just it shows and everything that he does another thing.

I see he does is he uses brass nails in here brass will never corrode. That’s why they use it on ships in saltwater and that’s why ships bells are made out of brass. When you use steel nails and you have the moisture that the foot introduces. It’s going to rust and corrode. That’s going to rot the leather that’s good. It’s going to break down the boot whole these boots are made to wear for 15 20 25 years.

If they’re taken care of and with brass all brass hardware. You’re never gonna have to worry about that the shank material. I’ve specked out and I wanted a shank is right in here right over here under your arch that prevents you from if you step on a nail or something or a shovel prevents you from damaging your foot. I had a bad experience in a wildland fire with a pair of boots that had a steel shank in them that steel shank heated up
.
When we were mopping up my boots were just unwearable. I had to stand in buckets of water. So I expect out that he uses a heavy leather all leather. So there’s no steel in the boot for that to happen one thing differently. You’re going to get from Adams boots is since. He’s a small shop in a custom shop. He’s hand cutting all his own leather from his own hides. He’s not having someone else like the bigger boot shops.

Where they’re just going to cut out pattern after pattern and never put any consideration into the types of hides. You know hide animal hide his skin. It’s a living thing. Is different you know how? It reacts depends on how the animal was treated in the environment and a great many things. So he hand selects leathers that are most appropriate. You know he can he can choose grains and line things up.

Excuse me so that they are the best for that particular application instead of just a one-size-fits-all. These are beautiful you know the thing that was nice to deal with him is that asked me the right questions? You know and told me it asked you know what issues have? I had with boots and one thing that’s always bothered me is if you look. There’s a little bump on this boot is for some reason on my left foot my pinky toe just gets rubbed raw.

It’s always painful regardless of how good the boots have been and he bumped that out he made it just a little bit of extra space on there. So I don’t have whatever won’t have that problem in the future and you know that’s the type of detail you get four hundred and fifty dollars for a pair of boots like this is a deal. In my opinion, you’re going to pay that same amount for White’s or Nick’s or Wests. Because they are the most comfortable work boots at ShoesCast.com.

If you want to learn more information about the best work boots for men, you can watch the video below to reference:

But you’re not going to get these features you’re not going to get a one piece outliner you’re not going to get hand selected hides. You’re not going to get this extra Custom Fit. You’re not going to ship your boots without the soles on them so you can be sure that they’re exactly how you want them? So you know for me and it’s a no-brainer. I can’t wait I just cannot wait to get the soles on these.

These are so pretty that I don’t even want to wear them out into the forest and I almost keep them for good but Adam told me I had to that that was not an option. That’s what they were designed for? So I thought I’d share that with you. So I’m going to call him. I’ll try these on tonight column.

We’ll go over the fit stand on the heel block make sure. I have everything right choose the sole. I want and man we’ll have one more post. I’ll show you when they come back in but aren’t they beautiful? They’re absolutely just beautiful Dallas are people rush. The gym is Jim Guthrie Megazord rush the rush Led Zeppelin wrote. I love this and see you again.

Review: AC556 Custom Kydex Holster

Hey guys coming at you with another holster review. Today, now Kydex holster review armed civilian 556 sent me a couple of holsters.

AC556 Custom Kydex Holster

I’ve been testing these out for the last little while one more so than the other just. Because that’s what I’ve been carrying and again. It’s armed civilian 556 that is his blog and I’ll put a link in above paragraph. I’ll probably put something around this area as well but this is just kind of a quick peek at the holster and you guys know I have become a big fan of the Kydex tough just love it.

These are really good looking holsters to before we go on too much further. Let’s go ahead and take a look at what it looks like underneath the shirt as these are specifically designed for concealment use. Right now I’m wearing the cap for the Glock 23 or 27 will actually work with both and I’ve got a strong side right here make it print just. So you can kind of see where we are but with this type of shirt.

You can see that it hides very well now this shirt is a little bit of a thicker cotton shirt and that’s what I find I have to use when I want to conceal an owl outside the waistband holster. But that’s what you’re looking at right there again this is the Glock 23 and one reason. I really like these holsters is? Because of the Kydex I there’s just something about kydex. I love it one you guys know I do a lot of backcountry type stuff.

So I don’t have to worry about it given you know the leather getting ruined out there due to the moisture in the elements. But more so I mean for them if you have to use your gun and you’ve got to reholster one of the best things about this is? It’s just so easy to put right back into the holster and your love them for range use these are really cool holsters again just give you a kind of a quick look of what it looks like underneath until is quite well.

I’m filming this it falls so the heavier. Clothing is starting to come out. You wear a hooded sweatshirt like this and this thing to just disappear in there again this is just kind of a  reference of what it looks like underneath? What really aids in the consumer one of this holster especially for a g23 is? The fact that it rides so close to the body this particular holster is designed to three o’clock position.

It’s got a knife nice curvature to it and we’ll take a closer look at that once. We sit down and I take this off but you can see how close that rides to the body. Here’s a bit closer look at the holsters the one on the left here that is made for the g20 three. Which will also fit the g-20 g 27 like I mentioned before this holster is designed for the XDS. I’ve just got the g27 that are holding it up for me but you can take a look at the beautiful carbon fiber print on that.

That’s actually an overlay on top of the Kydex and you can see if you’ve worn it. It will wear a little bit and I’m okay with that I kind of like that look. But it’s a really awesome look the carbon fiber is very nice and you can see that. I have used these quite a bit already but this is the men for the three o’clock position and you can see the curvature.

Pros and Cons AC556 Custom Kydex Holster

It’s a very comfortable rig and happy with it as well I love when I get my hands on a good holster just makes all the difference in the world when you’re carrying concealed and you can buy it at the website:https://www.shootingaz.com/best-kydex-iwb-holster/. I’ve used the Glock holster the most and I’ve used it heavily. I’ve used it daily and mice concealed carry I’ve used it on many different shooting trips and it’s held up great. There’s no cracking there’s been no problems with it show you the retention nice snap into place and that’s not going to go anywhere as I hit tripod and just for good measure.

Let’s go ahead and put some 27 in there as well. That’s not going anywhere either because I so recently returned from front sight one of the things. I noticed there on many of the what seemed to be new gun shooters are the holsters. They used instead of sitting up close to the body like this a lot of their holsters are just hanging. I mean to the point where if this is my side this is?

How they have pointed the weight of the gun just pulled them off and they were just about like this? You will not find that with these holsters, which take the gun and they bring it right up against your body they keep it straight up and down and very comfortable to use both these holsters are designed for outside the waistband carry again. The Glock holster is meant more for the three o’clock position.

Whereas the CX 2s? I believe is what it is called this is designed. You can use it for the three o’clock but you can also put it a little bit further back to the four thirty-five o’clock position. somewhere around there, however, you like it but this works very well and either of those positions so that has music into both and I’ve used this on several shooting trips as well the holster for the XDS is?

No different than the Glock holster in that it rides very close to the body and keeps the gun high and like I said close and it is great for concealment quick look at the back and the small differences between the two holsters. You can see this one has a little bit higher sweat guard than the other this one’s a little bit more minimal of course. It’s not as big as a gun that’s intended to conciliar.

But I’ve been happy with both of these again having used this one much more. But I wouldn’t hesitate to recommend either one of these. Now armed civilian 556 has a large inventory of blue guns for those. That isn’t familiar with blue guns are just it’s a fake gun. That’s the exact mold and size of a real gun. How can he make so many moles? So he has probably eighty percent ninety percent of most of the common guns out there.

So if you’re looking for something specific he likely has it armed civilian 556 also mentioned that. He might be playing with some other ideas about holsters for inside the car those type of things. So I don’t know exactly how far? He’s got on those ideas or maybe he already has them in place? But something else that you might want to ask him and if you’re interested in some of that stuff that might be kind of interesting and fun to play with as well.

I think he does knife sheaths that’s something else you can contact him about and the best way to get ahold of him right now is to go to his blog page and guys. I wouldn’t be directing you there if I didn’t think he was up to the task of making good holsters and in my communications, with him, he seems like just a good. He will have a website up and go soon I think it’s in the process of getting done maybe at the beginning of November. So I will if I get a hold of that and it’s up.

If you want to learn about AC556 Custom Kydex Holster, you can watch the video below to reference:

Maybe I’ll come back and annotate this? So it can be you can be directed to that as well make sure to tell him that croc at twenty cents him and he has many choices of colors patterns. I think he’s got to turn around time about seven to 12 business days at least. That’s the last it was when he talked to me and they’re great holsters guys can’t say it enough go over there check it out give him a look. He’s got some posted up his holsters so you can kind of take a look and see if there’s something that interests you as always guys thanks for reading. It’s much appreciated the whole string and I just don’t like the way that starting off.